Sentence examples for modifying the beam from inspiring English sources

This force configuration is to demonstrate the feasibility of attenuating the plate response by actively modifying the beam response.

Then, two additional 3D frames were included by modifying the beam and girder lengths to have one frame with lower span-to-depth ratio and one with higher span-to-depth ratio that the reference frame tested at the Conference.

With the accurate mechanical analysis of MEMS bistable mechanisms, a novel optimization based method for designing specific bistable characteristic is proposed by modifying the beam local segment's geometry for optimizing the bistable index parameter and two switching forces respectively.

November 2005 — Therapist Errors Result in Radiation Overdose A female patient with laryngeal cancer received a 47 percent overdose after a therapist left out the wedges, which modify the beam, for eight treatments.

We have investigated whether the terminal voltage reading depends on the insulating gas pressure, and how much the stripper gas pressure modifies the beam energy.

This approach modifies the beam pruning produced at recognition, by keeping alive (using a wider beam) those states that form a detection of a term in the white list.

Ridge filters and range modulators are used in proton therapy to modify the beam in order to spread out the Bragg peak, and make it wide enough so that the high dose distribution can cover the treatment targets.

The most important result of Wisniewska et al. to me is their report that the porpoises were able to flexibly modify the beam pattern independently of the level and frequency of the clicks.

The theoretical results show that the frequency range can be turned over the near-mid infrared range by changing the period of the structure from 1 μm to 3 μm, i.e., by modifying the proton beam line spacing during the irradiation process.

Ultrasound: zone of mixed echogenicity, predominantly hyperechoic, with a long axis parallel to the skin, not modifying the ultrasound beam.

To modify the oblique beam fluence distribution, a beam compensator composed of a lead sheet of 1 mm in thickness was employed according to the shape of the measured dose profile.