Sentence examples for modified samples the from inspiring English sources
Among all the modified samples, the 5.0%wt NiO doped sample shows the best electrochemical performance, which achieves a specific capacity of 129 mA h g−1 at 1 C current rate due to the modest graphitization of carbon layer on the surface of LiFePO4 particles.
On all modified samples, the total SFE and its polar component increased in comparison with pristine LDPE.
For both phosphoryl choline moieties modified samples, the O1s XPS spectrum showed a peak at the binding energy of 532.0 eV that belonged to the single bonds of C O and/or P O bonds and the humps at the binding energy of 530 eV which was the contribution of double bonds of C=O and/or P=O bonds [ 50].
Furthermore, the hydrothermal stability of the modified samples meets the requirements of commercial catalysts for hydrocracking.
A temperature range of 25 100 °C was used during the chemical treatment and it was found that the resulting modified samples had the total aluminium content in the range of 4.79 5.56 wt%, and crystallinity in the range of 57 64 %.
Table 7 lists the resulting modified sample characteristics for each factor and illustrates, for the AHFS modified samples, that the increase in mixture volume caused the total aluminium content in the bulk to decrease from 9.73 wt% before the modification to between 4.83 and 5.51 wt%.
The results showed that the cobalt modified samples retained the highly ordered mesopore structure of MCM-41.
Results of the voltammetric experiments and those from laboratory-designed test cells have confirmed a higher charge/discharge performance of modified samples towards the PbO2/PbSO4 transformation in aqueous sulfuric acid solutions.
A tiny spinel phase generates in the modified samples controlled by the amount of NaCl additive.
It revealed that the modified samples still maintained the mobil five (MFI) structure.
The contact angle investigations show that the wettability of the modified samples increases with increasing the gamma doses.
