Sentence examples for modified drilling from inspiring English sources

This study focuses on in-situ and laboratory evaluation of modified drilling waste materials (MDWMs) applied on base course construction.

The study focuses on the evaluation of the engineering properties of modified drilling waste materials (MDWMs) as base course materials in roadway construction.

Once coaches had modified drills, each coach demonstrated their modified drill on a basketball court.

Once coaches had modified drills, each coach demonstrated their modified drill to each other on a basketball court (approximately 30 minutes).The remaining time (about 35 minutes) was devoted planning their training sessions and completing a process evaluation questionnaire.

A study of a modified drill point design with plane rake faces for drilling high-tensile steels is presented.

Drill-life tests have also been carried out and confirmed the superiority of the modified drills over the conventional twist drills.

A geometrical analysis has shown that the modified drill point design yields positive normal rake angle on the entire lips and point relieving in the vicinity of the chisel edge.

An experimental study of drilling an ASSAB 4340 high-tensile steel with 7 13 mm titanium nitride (TiN) coated high-speed steel (HSS) drills has shown that the modified drills can reduce the thrust force by as much as 46.9%, as compared to the conventional twist drills under the corresponding cutting conditions, while the average reduction of torque is 13.2%.

The surgical technique requires a modified drill bit with a flattened tip, solid anatomical knowledge and experience of the surgeon.

For example, strategies to reduce management and instruction time [ 20, 21] in an effort to reduce inactivity, create leader awareness [ 20], modified drills where physical activity was more inherent [ 22], and preparation/organisation [ 21, 23]).

In addition to routine surgical instruments, Weitlaner and Gelpi-retractors, a periosteal elevator, pneumatic drill (Synthes, Waldenburg, Switzerland) with an 8 mm, slightly modified drill bit (KaVo INTrASurg 500®, KaVo Dental AG Biberach, Germany, modified by Synthes, Waldenburg, Switzerland) and a corresponding drill guide were used (Fig. 1).