Sentence examples for modification can be attributed from inspiring English sources

This modification can be attributed to ion implantation effects, which occur when using high DC biases.

Hence, the improved V OC of the device with the GO modification can be attributed to the reduction in the recombination current from the holes and electrons [40].

The BET surface area decreased from 54 to 1.28 m2/g for CPC-modified clay and to 2.19 m2/g for HDTMA-clay modification, which can be attributed to blockage and pore screening of clay by surfactant alkyl chains.

Although some developmental modifications occur, most can be attributed to growth (Ey et al. 2007), changes in hormone levels (Pfefferle et al. 2008) or arousal (Fichtel et al. 2001).

Obviously, the method requires the coda to be extremely repeatable so that any modification in its waveform can be attributed to changes into the medium.

Because all devices are fabricated at the same process except for the CH3NH3I modification, the difference in recombination rate can be attributed to the interface modification of CH3NH3I.

This modification of the sodic soil properties can be attributed to (i) the large amount of water supplied during cultivation that induced salt leaching.

The Ni electrode with induced compressive stress exhibited a higher exchange current density and lower Tafel slopes than those with induced tensile stress, which can be attributed to modification of the hydrogen adsorption energy, as evidenced by a downshift in the d-band center.

The difference between the local modifications and the original Gardner relationship can be attributed to the differences in the composition of the originating rock types and probably because the Niger Delta is not genetically related to the sedimentary basins that Gardner et al. (1974) used in their empirical calibrations.

Therefore, it not clear whether the differential sensitivity of fLuc and RLuc8 to H2O2 can be attributed to modifications within these proposed active sites alone.

The improved Jsc can be attributed to interface modification by removing the trap states at the interface of the ZnO.