Sentence examples for modes which occur from inspiring English sources
The method assumes failure modes which occur in a system and effects of failures are subsequently evaluated.
The wave finite element (WFE) method is used to describe the wave modes which occur around the circumferential direction of these periodic structures.
This study contributes an investigation and a removal of spurious buckling modes which occur in optimal multi-material topology designs of steel composite using MATLAB computational software version 2017a.
Apart from in-plane modes, we show in particular shear rotational modes which occur due to the high anisotropy, the distribution of mass, and the influence of the shear compliance.
Special attention is given to modes which occur in the frequency "forbidden" zone, and receptance methods are used to derive formulae for the frequencies of systems with a single-mass disorder.
It seems that such global bifurcations with trajectories passing through the saddles of the trivial path are due to the interaction of the first and second buckling modes which occur in the aforementioned small region of adjacent equilibria.
Owing to these effects, the fractures of the specimens tested were on the bottom flanges which resembled the failure mode which occurred during the Northridge earthquake.
Whether the deck was a tensile or compressive top chord, the primary failure mode, which occurred at high loads, was delamination within the GFRP at the deck's flange-to-web joints, and was neither failure of the GFRP-adhesive interface nor of the adhesive between deck units.
We can estimate the genome size as G = K_num/K_depth, where K_num is the total number of kmers, and K_depth is the peak frequency (i.e. the mode) which occurs more often than all others (approximate sequencing depth).
An extruded panel is represented by a single global mode subsystem and three subsystems representing local modes of the various strips which occur for frequencies typically above 500 Hz.
The results show that reinforcing a disk at the rim increases critical speeds drastically, and can cause buckling in mode (0,0) which occurs above the lowest critical speed.
