Sentence examples for modes that occur from inspiring English sources

For the Bloch surface modes that occur near the center of the bandgap, the attenuation by the periodic multilayer stack is stronger and the mode is tightly confined to the surface.

A structural vibration analysis was also performed following the aero-thermal-structural analysis to determine the changes in natural frequencies of the structural vibration modes that occur at the various temperatures associated with the descent trajectory.

The steady state response of spatially modulated doublet modes that occur in low count flexible bladed disks is investigated for the case in which the structure is driven by a harmonic travelling wave excitation source.

Fatigue crack initiation analysis is performed at the edge of the weld collar of an aluminothermic weld, in order to examine one of the failure modes that occur in this weld type under high axle load conditions.

The finite element simulation is validated through strain gauge measurements, and the results of fatigue analysis are compared with the locations of fatigue cracking and failure modes that occur in-service.

While most genera have aquatic larvae, there are several reproductive modes that occur in Gastrophryninae including terrestrial development (Myersiella) and non-feeding aquatic larvae (Syncope).

One of the predominant failure modes that occurs in URM buildings is diagonal shear cracking of masonry piers.

A phenomenon known as transition of modes from torsional into flexural is characterized by the sharp increment in resonance frequencies of modes that occurs at certain combinations of curvature and length of the arch.

Our study focuses on the 2 1 internal resonance phenomenon between modes that occurs when the excitation frequency is twice the first out-of-plane natural frequency of the cable.

The first step in this investigation was to simulate as accurate as possible representative tests corresponding to the collapse modes that occurred in a series of static edgewise compression tests performed in the National Technical University of Athens (NTUA) using various types of composite sandwich panels.

The failure modes that occurred during the single cycle testing were similar to those observed during the cyclic load testing protocol.