Sentence examples for modes of panel from inspiring English sources

Specific recommendations are made for the near-optimum distribution of the damping material on the panel surface which is effective for many modes of panel response.

Open image in new window Fig. 10 Failure mode of panels by relationship between C d /T and each blast charge.

Eigenfrequencies and modes of the panel are measured with a scanning-vibrometer.

These describe the deformation modes of the panel zone, namely extensional, flexural and due to shear.

The measurements taken from the FOBGs captured all changes in the buckling modes of the panel.

Through modal analysis, it is found that the even modes of the panel vibration are very important to cancel the sound radiation from the dipole source.

The optimisation of the structural modes of the panel is then achieved by placing a number of constraint masses and stiffeners of optimum size and weight at optimum locations on the plate.

Furthermore COMSOL multiphysics simulation software was used to calculate the force factor, BL, electrical force, Fe and the sound pressure level (SPL) of the transducer as well as vibrating modes of a panel that the transducer is attached.

It is found that matrix cracking, fiber breaking, foam cracking and debonding are the damage modes of sandwich panel with pure carbon facesheet, while other specimens merely show some of these modes after impact test.

With the aim of providing a tool for the comprehensive seismic analysis of steel moment resisting frames (MRFs), the paper presents the development of a structural model which is able to describe the deformation modes of the panel zone in beam-to-columns joints, without resorting to a computationally heavy FE discretization.

The results of the NHC panels were plotted for comparison with the failure modes of FRCC panels.