Sentence examples for modes of beam from inspiring English sources

There are many cases in engineering practice when it is necessary to know values close to exact for natural modes of beam and framing vibrations.

The main objective of the study was to determine the effects of two variables the shear-span-to-depth ratio and steel fiber dosage, on the web-shear and flexural-shear modes of beam failure.

The results indicate that three typical failure modes of beam failure, column failure, and simultaneous beam and column failure should be considered in the design of composite joints under fire loading.

In another study, six full-scale prestressed concrete I-beams with steel fibers were tested to failure by Tadepalli et al. (2015); the main objective of this study was to determine effects of steel fiber dosage on the shear and flexural modes of beam failure.

The failure modes of beams B-0, B-2-2, B-5-2, and B-5-4 were steel plate (rebar) yield/damage and concrete crushing, whereas the failure mode of beam B-2-4 was bolt failure as seen in Fig. 12d.

A method of finding the flexural and torsional normal modes of beams which have straight stiffness axes is given.

The relationship between the free wave motion and the natural flexural modes of beams is re-examined.

Three failure modes of beams with external CFRP laminates were observed, namely laminate rupture, laminate separation and peeling failure of the concrete cover attached to the laminate.

The model is used to study the resonant frequencies and damping ratios of the lowest several modes of beams with various boundary conditions and inertia and stiffness properties as the shear stiffnesses of the viscoelastic layers are varied.

While the prestressed FRP strips could be anchored by epoxy through the near surface mounting, the failure modes of beams strengthened with this technique might be the debonding of epoxy- concrete interface and delamination of the concrete cover.

An analytical, numerical, and experimental study of the vibrational modes of beams with constant curvature, ranging from small values up to helices with large numbers of turns, is presented.