Sentence examples for modes can be observed from inspiring English sources

Three typical failure modes can be observed depending on different eccentricity ratios, which were compression-controlled failure mode, balanced failure mode and tension-controlled failure mode.

Two different failure modes can be observed in the tests, and the joints with flexural failure at the beam end illustrate higher stiffness and strength, better ductility and energy dissipation capacity than those with shear failure at the joint core.

Depending on type of WLCSP and test board design, three primary failure modes can be observed, i.e. copper (Cu) board trace crack, Cu RDL (redistribution layer) vertical crack and Cu/Under Bump Metallization (UBM) delamination.

Experimentally, only several Raman/IR-active modes can be observed.

Certain shapes also produced a double-peaked profile but in the wavelength range in which the surface modes can be observed.

Considering the CPT fracture surfaces (2nd row), the three failure modes can be observed: intra-laminar of the composite (ILFC), adhesive failure (AF) and cohesive failure (CF).

Therefore, the shape of torsion fatigue cracks can be evaluated quantitatively and nondestructively, and the transition of crack propagation from the shear mode to the tensile mode can be observed three-dimensionally.

This permutation mode can be observed in Figure 1.

Two kinds of N-SET behaviors under DC voltage sweep mode can be observed.

Based on the calculated selection rules in [16], the TO phonon mode can be observed in the backscattering from the (110) and (111) InAs surfaces, while the LO phonon mode can be observed from the (100) and (111) InAs surfaces.

When two core-shell nanocylinder pairs interact with each other, such a plasmon mode can be observed.