Sentence examples for modes and strain from inspiring English sources

The failure modes and strain distributions, however, exhibit little difference between static and dynamic conditions.

The test results of both control and exposed GFRP pull-out specimens are presented in terms of pull-out strengths, failure modes and strain profiles.

Based on the comparison of experimental results of exposed specimens to control specimens in terms of bond strengths, failure modes and strain profiles, the most significant degradation of pull-out strength was observed in specimens exposed to outdoor environment, whereas temperature cycles did not cause any deterioration of strength.

Depending on the material and hole configuration, different failure modes and strains are observed.

The predicted strength, cracks pattern, failure mode and strain variation along the bond line agree well with test results.

The interface shear behaviors, focusing on the strength, failure mode, and strain of the grout and steel tubes, were evaluated by tests and finite element (FE) analysis.

In addition, predicted shear strength of the partially encased composite girder with corrugated web is proposed according to the experimental failure mode and strain distribution.

The ratio of size was 1.99 between the B-mode and strain image.

In a paper by Thomas et al. [ 17], still images from the original real-time sequences were selected by the person performing the imaging for later interpretation by two blinded reviewers who were presented with the B-mode and strain elastography images in a dual display and substantial agreement was found (weighted kappa = 0.73).

Modal parameters such as natural frequencies, magnitude of frequency response functions, displacement mode shapes and strain mode shapes were calculated against cracking in the plate.

Four beam-column assemblage specimens were tested subjected to cyclic loads, and the seismic behavior of the joints was studied including the load-deflection performance, typical failure modes, stress and strain distributions, and energy dissipation capacity.