Sentence examples for moderate pressure drop from inspiring English sources

The results show that the rectangular channel offers the best water removal characteristics under a moderate pressure drop.

The results obtained indicate that the optimized trios of cyclones outperform the conventional Stairmand (high efficiency) and Lapple (moderate pressure drop) geometries.

The most effective mixing performance was achieved at Re = 40 in which the STB micromixer had the highest mixing efficiency value (95%) and a moderate pressure drop ΔP = 30.27 kPa.

Results show that the mixing efficiency of the Tear-drop mixer is good except at the middle range of Reynolds numbers and its pressure drop is high; conversely, the Chain mixer has moderate pressure drop but relatively low mixing efficiency at low and middle range of Reynolds numbers.

Among the four reformer designs, IIR-SOFC containing an annular-coated wall reformer exhibited the highest performance in terms of cell power density (0.67 W·cm−2) and electrical efficiency (68%) with an acceptable temperature gradient and a moderate pressure drop across the reformer (3.53 × 10−5 kPa).

It is shown that the influence of the temperature field on such integral characteristics as cumulative gas production is most pronounced at moderate pressure drops.

β-SiC open-cell foams are promising materials for catalytic supports with improved heat and mass transfer at moderate pressure drops.

Although the rates of heat and mass transfer and therefore the efficiency of phase separation are proportional to the pressure gradient, devices achieving nearly 100% separation efficiency at moderate pressure drops can be developed by combining multiple separation mechanisms in microstructured devices.

We observed only moderate blood pressure drop in our animals following 7 hours of mechanical ventilation and therefore cardiogenic edema formation is unlikely to be the reason for the early increase in lung water content.

With rotation, the typical Re, Ro and Bu effects on Nu properties are followed by this compound HTE measure, but the relaxation of pressure gradients by rotation moderates the pressure drop penalties from the non-rotating references, leading to further elevations of thermal performance factors (TPF).

A parametric study, combining CFD and mass transfer simulations, shows that Dean vortices enable an increase of the mass transfer coefficient by a factor of 3, with a moderate increment in pressure drop or energy expenditure, when compared to the straight fiber.