Sentence examples for moderate corrosion from inspiring English sources

The EIFS values agreed well with the median corrosion-pit depths measured on the exposed specimens with moderate corrosion.

Key findings included the enrichment of Al from AZ31B and Zr from ZE10A, respectively, into the conversion coating, with moderate corrosion resistance benefits for AZ31B when Al was incorporated.

Zinc-based metals are the new alternative absorbable metals with moderate corrosion rates that fall between those of iron and magnesium.

This implies that the residual shear capacity cannot be predicted by using Eq. (2) with the reduced area of shear reinforcement (A_{v}^) alone for moderate corrosion, and, therefore, the effect of other factors must be taken into account in determining the shear capacity.

In a retrieval analysis of 100 taper junctions from metal-on-polyethylene articulations, 16% of the tapers had severe or moderate corrosion [ 4] independent of femoral head size [ 54].

Experimental results revealed significant changes in the normalized frequency, Rf, with decrease in Rf associated with load-induced cracking, an increase in Rf associated with moderate reinforcement corrosion and a subsequent decrease in Rf associated with repair.

Moderate to severe corrosion was detected in all 7 of these cases.

However, only moderate reduction in corrosion rate was observed in the case of single layer nano-Si coating.

Nevertheless, a surface modification where a moderate decrease in corrosion resistance coupled with a significant reduction in generated wear particles should be feasible for biomedical applications.

Amines and alkanolamines exhibit a moderate efficacy as corrosion inhibitors (Ormellese et al. 2009).

In a study in which retrieved femoral heads assembled onto unimplanted Ti-6Al-4V trunnions were mechanically tested, the authors concluded that the torsional properties of the taper junctions were not significantly influenced by mild or moderate grades of corrosion [ 60].