Sentence examples for modeling the specimen from inspiring English sources

Shell 181 element is used for modeling the specimen.

To model the specimen interaction with supports during an impact test, simple formulas for indentation contact force relation between a beam specimen and a rigid cylindrical indenter have been derived using a mixed analytical/numerical approach.

Also, based on parametric study, mesh fine and type of elements (using more higher order elements) do not affected on values of nodal force and displacements on crack tip and in order to model the specimens in this paper, just around the crack tip and along the crack over width of the specimens, the finer mesh has been used for VCC method.

This is because of the time-consuming process when modeling the actual specimen which was composed of numerous coarse aggregates with various shapes.

Birnbaum and Saunders (1969a) derived a lifetime distribution, known as the Birnbaum-Saunders distribution (abbreviated as B-S hereafter), which is founded on modeling the failure of a specimen that is subjected to a cyclic pattern stresses and strains.

We present a new method for modeling the development of settled specimens with filamentous growth patterns, such as fungi and oomycetes.

Finite Element modeling of the specimen was performed to set the test conditions and to predict stress-strain fields and failure location.

In addition to the experimental study, theoretical analysis and finite element modeling of the specimen and the loading condition were also carried out.

A well established framework for finite elastoplasticity with kinematic hardening is used to model the deformation of the specimens.

A multibody dynamic model of the specimen mounted in the simulator machine was constructed in commercial computer-aided engineering software.

Open image in new window Fig. 4 Strut-and-tie models for the specimen design (1 in. = 25.4 mm; 1 kip = 4.45 kN).