Sentence examples for modeled with solid from inspiring English sources
The second interface allows the transfer of temperature results from a thermal analysis modeled with solid elements to a structural analysis modeled with beams and shells.
Many diverse engineering problems can be modeled with solid sweeping in a conceptually simple and intuitive way, and sweeps are considered to be one of the basic representation schemes in solid modeling.
Hollow section box columns, I-section beams, end-plates, inner diaphragms and stiffeners were modeled using shell elements; high strength bolts and concrete slab were modeled with solid elements; and flexible braces and rebar were modeled with truss elements.
Thus, the material constitutive law used in this model is far simpler than the one in which the yarn is modeled with solid elements and the interaction among the fibers can be considered.
The nucleus pulposus and annulus fibrosis were modeled with solid elements with linear elastic material properties.
Two or four simulated pedicle screws (diameter, 6 mm) were inserted through the pedicles of L4 and L5 vertebrae unilaterally or bilaterally, and connected by one or two rods (diameter: 6 mm) modeled with solid elements.
Parametric reduced-order models developed previously have two important challenges to overcome to improve accuracy and performance: (a) the transformation matrix is not mathematically stable and (b) the Taylor series parameterization techniques do not capture thickness variations of the structure modeled with solid-type elements due to the highly nonlinear dependence on thickness changes.
It provides both advanced 3D modelling with solid elements and equivalent frame modelling.
An extensive topology optimization activity has been performed both on fixture-workpiece systems modelled with shell elements and on fixture-workpiece systems modelled with solid elements, varying the topology design variables and/or optimization constraints for each optimization problem, in order to provide a new design of fixture.
In the model, while the coating material is modeled with 3D solid elements, the fabric yarns are modeled as assemblies of truss elements.
The fillet could be considered by modelling it with solid elements.
