Sentence examples for model the piles from inspiring English sources

In the numerical model, the piles were treated as a linear elastic material and the soil was idealized using the Mohr-Coulomb constitutive model with a non-associated flow rule.

Recently, large deformation frictional contact has been used to model the pile installation and cone penetration processes.

In the numerical model, the pile was treated as a linear elastic material and the soil was idealized using the Drucker Prager constitutive model with a non-associated flow rule.

In this model, the pile and soil were modeled using eight-nodded solid continuum elements.

In this model, the pile was modeled according to the exact dimensions of a HP 16 × 101.

In this model, the pile and sand were modeled using eight-nodded solid continuum elements (C3D8R) to account for the continuum nature of the soil in Abaqus/Cae.

A relatively fine mesh was adopted for the pile and a coarser mesh was adopted for the clayey soil as shown in Fig. 4. In this model, the pile and clay were modeled using eight-nodded solid continuum elements (C3D8R) to account for the continuum nature of the soil in Abaqus/Cae.

In the SAP2000 model, an elastic three dimensional (3D) frame element was adopted for modeling the piles.

In the Abaqus/Cae model, an elastic perfectly plastic model was adopted for modeling the piles with a modulus of elasticity of 200 GPa and yield strength of 345 MPa.

The analysis is performed by modeling the pile like an Euler Bernoulli beam embedded in a layered Winkler-type medium.

Numerical results obtained by the proposed model for the pile are consistent with existing numerical and experimental results, validating the proposed model.