Sentence examples for model the adhesion from inspiring English sources

An adequate contact algorithm is implemented to model the adhesion between the layers.

Besides, a laminated glass model is proposed, in which brick elements are adopted and an intrinsic cohesive formulation is employed to model the adhesion between glass and PVB.

Based on a newly developed energy balance model, the adhesion energy of Cr films on polyimide substrates is determined by measuring the buckle geometry induced by the tensile test.

To determine whether this mechanism is involved in the S. marcescens tissue-cell-culture infection model, the adhesion properties of several clinical isolates of S. marcescens were first evaluated.

As mentioned before, referring the drag coefficient to the adhesion intensity is used in previous models such as [62] [64], so in the following, if a 2D culture is modeled, the adhesion intensity is equivalent to the drag coefficient.

As catalyst particles are normally highly porous, have a rough surface, and an irregular shape, we developed a generalised model describing the adhesion of particles to a gas bubble based on maximum adhesive and cohesive forces as the main parameters.

Previously we have proposed a generalised model, describing the adhesion of particles to G L interface under stagnant conditions.

A mathematical model describing the adhesion behavior as a function of the maximum stress and total displacement was developed and verified.

In addition, the capillary model predicts the adhesion forces at 35°C should show similar dependence on humidity.

This was based on the premise that the SS1-AGS model mimics the adhesion of H. pylori to gastric epithelial cells in vivo.

According to Sauerbrey's model for the adhesion of rigid thin layers, there is a linear relationship between the frequency decrease (−Δ F) and the mass increase per unit area (Δ m/ A).[ 27] As this model was not developed for soft organic films, it only serves as an approximation in our synthetic cell model.