Sentence examples for model solutions using from inspiring English sources

Investigation of the reported temperature dependence of aH2O on treatment efficiency was conducted between 5 and 35 °C, in model solutions using carbamazepine as a radical probe.

Numerical model solutions using CFD with geometries from CT scans were closer to measurements than those obtained using the traditional circular cross-section strand simplification, indicating that CT scans are very well suitable to approximate real feed spacer geometries.

In this work an experimental procedure was established to assess the main engineering parameters characterizing the ultrafiltration (UF) recovery of a commercial sample of sodium alginate from model solutions, using both a laboratory-scale and a pilot-scale plant equipped with ceramic tubular UF membrane modules.

To better characterize Cr VI) removal from model solutions using Pd-BnM, supplied with formate or H2, batch experiments were performed employing variable starting pH values (Fig. 1).

Upon reaction with model solutions, using H2 or formate, larger micron-scale aggregates formed (Fig. 4c and d), which from TEM-EDX analysis are composed of a high abundance of Cr associated with the nano-scale Fe-Pd rich particles (Fig. 5a and b).

In terms of FO performance, the TFC-FO membranes with 50 wt% sulphonated material content can achieve the highest water flux of 33.0 LMH against DI water and 15 LMH against the 3.5 wt% NaCl model solution using 2 M NaCl as the draw solution tested under the pressure retarded osmosis (PRO) mode.

To quantify effects of an explicit SGS model on solutions using a non-oscillatory scheme, decaying homogeneous isotropic turbulence is simulated with and without an SGS model (explicit and implicit LES respectively) on coarse, medium and fine meshes.

Non-dispersive extraction often selected aroma compound was carried out on very diluted model aqueous solutions, using membrane contactors, in two configurations: liquid-liquid and liquid-gas.

The affinity isolation of pre-purified plasmid DNA (pDNA) from model buffer solutions using native and poly ethylene glycol) (PEG) derivatized zinc finger GST (Glutathione-S-Transferase) fusion protein was examined in PEG dextran (DEX) aqueous two-phase systems (ATPSs).

Inactivation of the catalyst is also of great concern when considering catalyst applications, therefore this was investigated after reaction with the model and COPR solutions, using a variety of spectroscopic and nano-imaging techniques.

In Fig. 6, the autocorrelation functions found from stochastic simulations for isotropic (Fig. 3) and anisotropic (Fig. 5) cases were compared with the model solutions found using different combinations of diffusion coefficient values for the longitudinal (y-axis) and transverse directions (x and z axes, considered to have the same diffusion coefficient).