Sentence examples for model inlet from inspiring English sources

In the model, inlet pressure (Pi), conical valve angle, length to diameter ratio (L/D) and cold mass fraction (yc) are used as input parameters while total temperature difference (ΔT) is chosen as the output parameter.

In these experiments, a reduced number of stators (four) was used in a 1/14 scale model inlet which was coupled to a 4·1in (10·4 cm) turbofan engine simulator.

The paper presents an experimental study into the thermal-hydraulic performance of the VK-300 reactor based on a model of a single draft tube at a pressure of 3.4 MPa, various flow rates and the model inlet relative enthalpies of –0.05 to 0.2.

It directly and accurately describes inlet boundary conditions and models inlet mass, momentum and buoyancy flows.

To predict the CO2 production rate and CO2 capture level, eight parameters in the process were utilized as model input variables: inlet gas flow rate, CO2 concentration in inlet flow gas, inlet gas temperature, inlet gas pressure, lean solvent flow rate, lean solvent temperature, lean loading and reboiler duty.

First of all, an integrated aero-propulsion system model including inlet and engine is built to simulate the coupling problems between inlet and engine.

This hypothesis was modeled by injection of two discrete salt pulses into the model springs inlet at the appropriately scaled time in the modeling run.

Local prevailing weather conditions are imposed in the CFD model as inlet boundary conditions.

For the DPM model, the inlet and outlet boundaries were set as an escape zone, while the walls of condensate and water zones were assumed a trap area.

The input parameters to the ANN model were inlet concentration (ppm) and flow rate (m/d), and the output parameters were six concentration-time pairs (C, t).

To mimic the device, we model the inlet particle jet stream from the device as a spray entering the mouth in a conical fashion.