Sentence examples for model alloy was from inspiring English sources

To obtain the best accuracy for these precipitation measurements, a model alloy was designed that showed extensive precipitation.

The model alloy was characterised after milling and annealing by complementary techniques, including atom probe tomography.

Substructure development in an austenitic Ni 30%Fe model alloy was investigated within a dynamic recrystallization (DRX) regime.

Because the targeted application of this model is the study of precipitation in Ni-based superalloys, a Ni Al Cr model alloy was constructed.

Therefore, the interaction between hydrogen, carbon monoxide or oxygen with the surface of a PdAg model alloy was studied using periodic self-consistent density functional theory (DFT-GGA) calculations.

The interdiffusion behaviour of a 5 μm thick layer of Pt deposited by electroplating on a γ-Ni-12Al-10Cr γ-Ni-12Al-10Cr γ-Ni-12Al-10Cr γ-Ni-12Al-10Crhe effect of Cr.

To adjust the grain size of model alloy, an annealing process was conducted at 1200 °C for 2 h with a cooling rate of 25 °C/s (Detailed mechanical and microstructural properties of the model alloy are represented in Supplementary Fig. 5).

The predominant microstructure of SA508 Gr.4N model alloy is tempered martensite, while SA508 Gr.3 Cl.1 and Cl.2 steels show a tempered upper bainitic structure.

In this work, two model F/M steels (12Cr model alloy and 9Cr model alloy) were irradiated with 1 MeV Kr ions at 50 K, 180 K, 298 K, 473 K and 573 K in situ in a TEM.

This observation clearly demonstrates that, under these irradiation conditions, Mn clustering in this model alloy is radiation-induced and not radiation-enhanced.

The effect of increased water vapor on alumina-forming coatings and model alloys was investigated at 1100 °C in furnace cyclic testing.