Sentence examples for mode with current from inspiring English sources
By changing the PFO/ZnO nanoparticles concentration ratio the PFO ZnO OFET shows either unipolar or ambipolar behavior of current voltage characteristics and operates in the hole/electron accumulation mode with current saturation behavior.
The STM images were recorded in constant current mode with tunneling current of 10 250 pA.
Excellent electrochemical performance is observed under galvanostatic mode with a current density of 0.3 A/g.
The mass spectrometry mode used was electron ionization (EI) mode with a current of 70 eV.
The system uses bioimpedance in bipolar mode with direct current, and measures the electrical conductivity of 11 pathways of the body, each recorded twice from anode to cathode and then from cathode to anode.
The previous studies highlighted the importance of investigating the whole-building behaviour and provided a useful insight into the temperature distribution throughout the floor slab, failure modes, comparisons with current design rules and time displacement behaviour of the floor under fire conditions.
The hydrogenolysis of an alkaline aqueous solution of xylitol to mainly ethylene- and propylene-glycols was studied over a Ru/C catalyst in a high pressure fixed-bed reactor run in the trickle-bed mode with co-current downflow of liquid feed and hydrogen.
The resting membrane potential (Vrest) was estimated immediately following membrane patch rupture in current clamp mode with zero holding current (I = 0) and, like all voltages in this paper, was adjusted for an estimated liquid junction potential of ∼+15 mV.
STM images were obtained in the constant current mode with the set point currents in the range from 0.1 to 1.0 nA. Figure 1 I V curves of single DNA molecular at different concentrations of Ni (a) and Ag (b) ions in neutral environment.
We performed ITP in galvanostatic mode with a run current of 800 μA and capture currents of 200, 200, and 600 μA, respectively.
We performed ITP in galvanostatic mode with a run current of 800 μA and a capture current of 200 μA.
