Sentence examples for mode which requires from inspiring English sources

In that case, the mode which requires the next greatest autonomous capacity would be turned to: the bicycle.

Firstly, the controller is developed based on terminal sliding mode which requires the prior knowledge of the robot dynamic model.

For instance, molecular beam epitaxy (MBE) and metal organic chemical vapor deposition (MOCVD) provided nanodots growth via Stranski-Krastanov (SK) mode, which requires sufficient lattice mismatch between substrate, wetting layer and epi-layer [6 10].

For example, applications such as point-of-interest notification, which informs about the presences of locally based services and/or points of interests, may lead to severe network congestion, particularly if we take into account its communication mode which requires a periodic and permanent message broadcasting [1].

On the one hand, the most frequently used fabrication approach is self-assembly process via Stranski-Krastanov (SK) growth mode which requires sufficient lattice mismatch, but it is harder to acquire low-density GaN QDs and usually results in randomly distributed QDs with different sizes [10, 11].

In practice, sometimes, we only interested in the pose of hand, which can be used to directly drive the end effector of a robot, or in some other cases, we may also need to command robot in a jointed mode which requires joint angles date captured from skeleton tracking.

This was probably due to the fact that the animals were mechanically ventilated in pressure support ventilation mode, which required adjusting the anesthesia between consecutive scans in order to maintain the animal stable under mechanical ventilation.

Anesthesia was used if the rabbit was active, or if detailed diagnosis required imaging in fine mode, which required 120 s of scanning.

In the case of IS and LMWID, the monitoring and hospital costs were substantially higher due to the different delivery mode, which required a substantial amount of time for each infusion.

Since lateral size of the studied structures is in the range of 30 to 70 nm, mapping should be performed at high magnification and high resolution in Auger and secondary electron image modes, which requires overcoming a number of difficulties.

The two excitation frequencies and the timing of the strobe pulse used in the experiments are chosen on the basis of anticipated phase angle behaviour of the various modes, which requires prior knowledge of their damping factors and natural frequencies.