Sentence examples for mode were simulated from inspiring English sources

Finite Element contact models of reconstructed hips, subjected to physiologically-based boundary constraints and peak loads of walking mode, were simulated using a coefficient of friction of 0.4 and an interference-fit of 50 μm.

First, following [1, 3] the degradation in the spatial resolution due to the fractional aperture synthesis mode were simulated via blurring the original image with the range AF along the y axis and with the azimuth AF along the x axis, respectively.

The delamination failure mode is simulated by using the cohesive zone model available in ABAQUS.

A fixed-geometry engine operating in ejector mode is simulated to investigate the ejector mode of a hydrogen fueled RBCC engine.

The model field, dispersion, birefringence and confinement loss of the fiber fundamental mode are simulated by full-vector finite element method.

A circulating fluidized bed reactor operated in a continuous mode was simulated within two sets of 3D cylindrical coordinates for the downer and riser.

According to the computer simulation technique, the tracing time interval and the corresponding mode curve, which is based on the aim-interval control mode, are simulated and calculated with proper models and algorithms which are put forward by this paper.

The optical properties, such as effective refractive index, electric field intensity, effective mode area, nonlinear coefficient and chromatic dispersion of the fundamental mode are simulated by using full-vectorial finite element method (FVFEM).

A rock slope model with a bilinear failure mode is simulated and progressive failure process of the rock slope is obtained, which demonstrates the applicability of the proposed method in practical rock engineering.

A solar photoelectro-Fenton (SPEF) plant containing a filter-press FM01-LC flow reactor in series with a compound parabolic collector (CPC) as photoreactor, operating in batch recirculation mode, was simulated using a parametric model.

Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with three-dimensional Navier Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower upper symmetric Gauss Seidel (LU-SGS) time-stepping scheme.