Sentence examples for mode were performed from inspiring English sources
Electrochemical polishing of the inner surface of the cavity and frequency tuning of the accelerating mode were performed before each cool down test in order to maintain the RF performance and obtain a higher gradient.
Then, different cooling and stirring failure scenarii in a semi-batch lab-scale reactor under isoperibolic mode were performed.
Representative two-dimensional simulations of the mirror instability and the temperature gradient driven instability of the compressional mode were performed, and the simulation results are in very good agreement with linear theory.
The NF experiments, in total recycle mode, were performed in a plate-and-frame module Lab 20 (AlfaLaval), at 22 °C and with a flowrate of 8.2 L/min, using the membranes NF90, NF200 and NF270 from FilmTec (Dow Chemical), for transmembrane pressures between 1 and 6 MPa and with aqueous solutions with osmotic pressures of between 0.5 and 3.0 MPa.
Continuous adsorption trials in dynamic flow mode were performed in a home-made disk filter device for the removal of three model estrogens in 100 mL solution.
TEM and energy dispersive spectroscopy (EDS) in the STEM mode were performed to understand the nanostructures and compositional variations of the resulting thin films.
The determination of cell death mode was performed three hours after PDT.
A thermodynamic analysis of a solid/gas reactor operating in open mode is performed.
Furthermore, dynamic simulations in open loop mode are performed to analyze the transient behavior of the column system.
Tandem mass spectrometry in negative mode was performed by isolating and fragmenting the ion [PGE2-H]− signal m/z 351.
Analysis related to each fault mode is performed using compositional rules and derived safety interfaces for each component.
