Sentence examples for mode were obtained from inspiring English sources

Temperature, internal pressure, deformation, ultimate bearing capacity and failure mode were obtained and analyzed.

Based on the high-cycle fatigue testing that followed, the fatigue crack initiation, propagation and fatigue failure mode were obtained.

Moreover, an alternate optimization method was introduced to solve this optimization problem, and optimum amplification gains in the HD mode and the FD mode were obtained.

For polymer monoliths containing 50% deprotected 4-acetoxystyrene, column efficiencies of 40,000 plates/m for benzene in reversed phase mode and 31,800 plates/m for nitrobenzene in normal phase mode, were obtained.

By applying high-order moment standardization technique (HOMST), reliability and sensitivity with single failure mode were obtained and then the reliability model and the sensitivity model with multiple failure modes were developed and common methods such as Narrow bounds, AFOSM and Monte Carlo were used for verification and comparison.

Based on the thermal tests it was observed that the highest mass transfer rate and heat flux under the low-temperature and high-temperature operation mode were obtained for an SU-8 heat exchanger with capillary height of 134 μm and silicon heat exchanger with capillary height of 100 μm, respectively.

Defect mode was obtained according to the GRIN distribution functions.

The first natural frequency at the mode is obtained at 1799 Hz.

For each scan, first a 10-min transmission scan in 2D acquisition mode was obtained.

The natural frequency and vibration mode are obtained using eigenvalue analysis.

The ν3 mode is obtained from the Fe3+–O complexes at octahedral sites [27].