Sentence examples for mode were approximately from inspiring English sources

Considering the second order effect, the deformed shapes of columns bent in double curvature mode were approximately symmetric about the deformed shape of axially loaded column not about the original un-deformed axis of the column.

The measured lateral deformations of all columns having equal end eccentricities and bent in single curvature mode were approximately symmetrical about the mid-height point as depicted in Fig. 8a.

Lateral resolution in the μ-ARPES measurement mode is approximately 5 μm, and for this reason some contribution from the HOPG substrate can be seen in the image.

The distribution of Dn on the detonation wave in the stable mode was approximately formulated.

In actual fact, it is found that flow measurement based on the fundamental mode is approximately free of errors while all other modes are characterized by the same (and, generally, non-vanishing) deviation of measurement.

For appropriate choice of system parameters, the natural frequency of the second mode is approximately three times that of the first mode for a range of mean flow velocity, activating a three-to-one internal resonance.

The obtained results indicate that the maximum load for the shear fracture mode is approximately three times larger than that for the tensile fracture mode and that the displacement in the shear fracture mode is also larger than that in the tensile fracture mode.

The test time required to evaluate an image with a pixel resolution of 1024 × 1024 pixel in GPU mode is approximately 0.04 s, which means the method based on a Faster R-CNN has the capacity of a quasi-real-time autonomous dispersion evaluation in GPU mode to replace a human-assisted microscopic dispersion evaluation in OP images.

The Cu-Mn distance in this mode is approximately in the range of 2.73 to 3.98 Å (Additional file 1: S1).

LEE for the TM mode is approximately ten times lower than that for the TE mode, which is attributed to the strong TIR effect for the TM mode.

As observed, the computational cost of the proposed system using the rhombus (2D) integration mode is approximately four times the computational cost needed when 1D modes are used.