Sentence examples for mode using high from inspiring English sources

Explorer atomic force microscope was a tapping mode, using high resonance frequency (Fo = 312 kHz), pyramidal cantilevers with silicon probes having force constants of 20 N/m.

Explorer atomic force microscopy was in the noncontact mode, using high resonant frequency (F0 170 kHz) pyramidal cantilevers with silicon probes having dynamic force.

Substantial advances in lipidome investigation have also been made with shotgun-like workflows, either using combined precursor or neutral loss scan modes [ 26] or in scan mode using high-resolution instruments [ 27], but triple quadrupole-based, triple quadrupole-basedl stargetedresent the reference tools for clinicapproachestions in the near future.

For higher MCS modes, using higher multicast server rates results in higher PER and, as a result, longer download times (especially at increased AP-to-tablet separation distances).

It can be seen that for lower/robust MCS modes, using higher multicast server rates provides lower download times since the PER is low as shown in Fig. 14.

AFM images were taken with a Cervantes AFM microscope driven with a Dulcinea control system (Nanotec, Madrid, Spain) working in tapping mode and using high frequency cantilevers.

The advantages provided by this method include unique deposition modes realized using high electric fields and complicated pressure injection due to high resistance at the nanopipette tip.

The nanoscale images presented were performed using Nanoscope V atomic force microscope (AFM) obtained in tapping mode using ultra high resolution cantilevers made of tungsten having radius of less than 1 nm and force constant of 46 N/m.

Although a certain degree of post-contingency overloading is allowed, the using "high economy" mode is attractive because of the following three facts: 1) The probability of a contingency occurrence is very low, e.g., the trip of a transmission line may happen only several times during a year, but we have to prevent it in SCOPF model for every hour.

Furthermore, in the TCI mode, using a higher grade inertial sensor is beneficial for the PPP convergence; (3) under the partial GNSS outage situations, the PPP/INS TCI mode position divergence speed is also restrained significantly; and (4) the attitude determination accuracy of the PPP/INS integration is highly correlated with the grade of inertial sensor.

Data were collected in fluorescence mode using a high-count rate Canberra 100-element Ge array detector with maximal count rates per array element of <120 kHz.