Sentence examples for mode the sampling from inspiring English sources

For the swept FFT mode, the sampling phase must be interrupted for channel switching, which is the only cause for time loss.

This is because when using the swept FFT mode, the sampling is not continuous and sometimes only part of the beacon packet is captured, leading to inaccurate power measurement.

However, once a node is put into sleep mode, the sampling is not uniform anymore; this aspect emerged in [11] and is fully considered by the algorithm presented in this work.

In this case, the cross correlation test is carried out, in which for a proper mode the sampling CCF ρ ^ a a ^ k, between a ^ t and a t, must not show standards and must be within its two standard-errors, 2 (n − k)−1/2; in other words, the noise series a t and the X t entry series must be independent.

Within the country, PMMSS in 40% provinces adopt complete maternal deaths registrations; in most provinces adopting sampling surveillance mode, the sampling percentage varies from 14.6 to 34.8%, which is obviously higher than the sampling percentage of the NMCMSS (about 5%) [ 2, 5].

Using flow injection mode, the sample throughput could come to 120 h−1 attributed to the small dimension of the cathode chamber.

In the CVG mode, the sample and the oxidizing solution are continuously pumped and mixed directly before entering a concentric nebulizer placed in the PTSC, while in PCVG mode the sample solution containing 3%v/v acetic acid is on-line exposed to UV radiation before nebulization.

The sample was packed in a cylindrical vanadium holder (dia. 8 mm), and the counting time was 2 h in the high-intensity mode; the sample holder was rotating during the acquisition time.

Cylindrical vanadium holders were used to pack the samples (diameter 8 mm), counting during 2 h in the high-intensity mode; the sample holder was rotating during the acquisition time.

To characterize the nanoparticle distribution, we resorted to near-field optical microscopy operating in transmission mode (the sample was excited through the objective, and scattered light was collected with fiber probe).

In this conventional injection mode, the sample volume is often less than 10 nL, which is 2 orders of magnitude smaller than the injection volume commonly used in reversed-phase liquid chromatography.