Sentence examples for mode the optimized from inspiring English sources

After subsequent optimization in flow-injection analysis (FIA) mode, the optimized parameters were translated to the on-line HRS bioassay.

Maximum biosorption capacity obtained in continuous mode under the optimized conditions was 69.08 mg/g.

The UHPLC system was coupled to a qTOF mass spectrometer (Agilent technologies 6530) equipped with an ESI source operating in positive ion mode using the optimized parameters as follows: nitrogen as nebulizing gas with a flow rate of 12 L/min and a temperature of 310°C at 40 psi, scan spectra from m/z 100 to 2000, capillary voltage 3 kV, fragmentor 120 V.

Taking into account electronic velocity spread, and cavity wall resistivity and basing on single-mode approximation, the optimized design and simulation of beam-wave interaction of a 170 GHz MW corrugated coaxial-gyrotron have be fulfilled.

Figure 1(b) illustrates the spatial distribution of the power density (Poynting vector) for both TE and TM modes of the optimized PWR sensor.

To get high performances, the exciting angles are optimized in two different operating modes respectively, and the optimized performances in the motoring mode are given as well.

Stable single-mode emission is achieved under all injection currents and temperature conditions without any mode hop by the optimized antireflection (AR) coating on the front facet.

The calculated mode volume of the optimized PC L3 nanocavity with air hole displacements A = 0.2a, B = 0.025a, and C = 0.2a is 0.0754 μm3, which agrees well with the reported mode volume as 0.074 μm3 in [26].

Parametric optimization of the TLD is carried out based on the one-mode model, and the optimized damper effectively improves the dynamic response of wind turbine blades.

This is likely the reason why the optimized mode A has higher Q than mode O.

Fig. 2 Line mode profiles along vertical Z direction and patterned mode profiles on the YZ and XY planes of the optimized optical a mode O and b mode A. Note that the line profiles are indicated by the X-polarized electric field, while the plane profiles are displayed by light intensity.