Sentence examples for mode of pin from inspiring English sources

Through-thickness metallic pin reinforcements can significantly improve the performance of hybrid metal-composite joints, particularly when failing in the high-energy mode of pin pull-out.

Microstructural analysis and z-pin bridging traction tests revealed that misalignment of z-pins, interfacial cracking around z-pins, porosity within z-pins, and failure mode of z-pins each affect the traction properties, albeit in different ways.

Existing bridging traction models use several simplifying assumptions about the physical condition and failure mode of z-pins embedded within laminates which compromises their numerical accuracy.

Noordeen et al. [12] investigated the mode of failure of pins inserted into either anterosuperior (behind the ASIS) or anteroinferior (above the AIIS) sites in response to a lateral closing force.

This model was then used to characterise pin failure mode and energy as a function of pin geometry across loading ratios ranging from pure tensile to pure shear.

Compared with the full-threaded pin, fracture mode of the FSLW joint changed from shear fracture mode to tensile fracture mode when the reverse-threaded pin was used.

In the standard cantilever-loaded mode, the monolateral fixator is at risk of pin loosening and breakage.

The ELM 304 has two main modes of operation, determined by the status of pin 4: pure white raster (pin 4 high) and grey color bar raster (pin 4 low).

We cannot rule out the less parsimonious possibilities that Pins lost an ancient capacity to bind GKPID in choanoflagellates or that some unique and unknown mode of association between GKPID and Pins operates in S. rosetta, such as requiring a bridging protein or some post-translational modification.

Main failure modes of the Z-pin are: debonding between the Z-pin and matrix, split and rupture of the Z-pin material; these have been taken into account here.

In UART mode, UART_TX pin is used to send data to the microcontroller and UART_RX pin to receive commands from the microcontroller.