Sentence examples for mode of oil from inspiring English sources

The project took off from a reproduction of "Abstract Painting (724-4)," a multi-hued work, from 1990, in Richter's familiar mode of oil paints dragged in layers across canvases with squeegees or boards.

It was found that 14% oil sludge could be added to raw mixture and that variations in the mode of oil sludge addition had no obvious effect on the combustibility of the mixture or the cement quality, such that all cement samples satisfied the P.O 42.5 standard.

The start-up characteristics of the engine in the intake port and combustion chamber under the fuel supply mode of the oil pump were studied.

The factorial analysis showed that for the batch mode of operation, oil concentration, detention time, coagulant use, and water type had a significant effect on PHC removal.

However, the effect of different water injection modes on oil recovery varies.

These results confirm that the prediction and the evaluation of radiator cooling performance can be applied to design optimization of cooling mode for oil-filled power transformer applications.

Injecting a partially miscible solvent ethane (C2) at 200 psi (much below the MMP at 77 °F) in the VAPEX mode recovers a substantial amount of oil (up to 40% PV in 2 PVI).

However, reproducibility of this protein microspheres production was suggested to be dependent on several parameters, which includes the mode of dispersing proteins into oil, absolute amounts of constituents and pH of the reaction.

The mode of administration of fish oil, the composition of the control solution, and the differing incidences of diarrhea, suggesting differences in absorption, have been proposed to explain some of the discrepancies in the results of clinical studies.

After the injection of high salinity smart-water in secondary mode, the low-salinity water injection in tertiary mode apparently triggers connection and mobilization of oil ganglia, as hypothesized from the recovery response.

It is shown that the optimum rotor profile, compressor speed, oil flow rate and temperature may significantly differ when compressing different gases or vapours or if working at the oil-free or oil-flooded mode of operation.