Sentence examples for mode of fatigue from inspiring English sources

Open image in new window Figure 9 Failure mode of fatigue (A) Crack location and (B) final failure of corrosion fatigue and fatigue in air.

The mode of fatigue loading selected was flexure in compression compression at R = +10.

This is a review of the mechanics of tendon, with new observations on: (i) elastic modulus around zero stress and (ii) the mode of fatigue rupture.

The effect of lime in increasing the stiffness of the mix can be beneficial to thicker bituminous pavements, which will be in stress control mode of fatigue.

The cyclic loading mode of fatigue test was based on the actual working condition with loading amplitude of 7.2 kN, stress ratio of 0.1 and loading frequency of 10 Hz.

However, the failure mode of fatigue specimens under each stress level was all ruptured at the Al sheet and the fracture analysis showed that cracks firstly initiated around the hole of Al sheet.

To do so, residual strain was chosen as an indicator to evaluate fatigue damage states and a Fictitious Distributed Crack Mode of fatigue-damaged concrete beams was proposed to incorporate residual strain into diffusivity of CO2.

Fatigue was assessed using the Checklist Individual Strength (CIS), a self-report instrument consisting of four scales based on different modes of expressing fatigue (fatigue severity, reduced motivation, reduced activity, reduced concentration) [ 19, 20].

The Fatigue Ductile Brittle Transition (FDBT) is a phenomenon similar to the fracture ductile to brittle transition, in which the fracture mode of the fatigue cracks changes from ductile transgranular to cleavage and/or grain boundary separation.

The paper is focused on an identification of the local mode II mechanism of fatigue cracks loaded under the remote mode III and the mixed mode II + III and presents a convincing experimental evidence of such a mechanism in materials with a nearly coplanar crack growth.

Sandwich beams with aluminium face sheets and an aluminium alloy foam core are tested in cyclic four point bend, and S N fatigue curves are determined for the failure modes of face fatigue, core shear and core indentation.