Sentence examples for mode fracture test from inspiring English sources

A generalized maximum tangential stress criterion is then employed for predicting the mixed mode fracture test results.

The Brazilian disk, a classic mixed mode fracture test specimen, was adopted for the experimental characterization of the crack initiation.

The semi-circular bending specimen (SCB) is employed to perform a total number of 36 mixed mode fracture tests on the prepared nanocomposites.

By manufacturing the specimens with different residual stresses, mixed mode fracture tests with various mixed mode ratios were conducted and the effect of the mixed mode ratio on the energy release rates was investigated.

The present work aims to present novel numerical results of complete failure simulations performed on pre-cracked beams made of LWAC, subjected to a mixed-mode fracture test.

The ASTM standard mode I fracture test was conducted to determine the resistance (GIR) as a function of delamination extension.

For this aim, a mode-I fracture test is conducted on virgin and modified laminates.

Mode-I fracture test was conducted to obtain the fracture resistance GIR as a function of delamination growth.

While only 50% of as-cast samples demonstrated plastic deformation during mode I fracture tests, 100% of imprinted samples demonstrated measurable plasticity and the scatter in measured mode I fracture toughness was significantly reduced.

For all these configurations mode I fracture tests are carried out.

Single edge notched specimens are prepared from the degraded samples and mode I fracture tests are performed.