Sentence examples for mode experiments were from inspiring English sources

Batch mode experiments were carried out to assess the adsorption equilibrium.

Batch mode experiments were performed to determine the adsorption equilibrium of cyanide in aqueous solution.

Batch mode experiments were also carried out to assess the adsorption equilibrium in aqueous solution.

The concentration mode experiments were carried out at 15 bar and at a recirculation flow rate of 554 L/h.

Batch mode experiments were conducted using various parameters such as pH, contact time, biosorbent amount and safranin concentration.

In order to optimize the operational parameters such as adsorbent dose, time of contact, pH of the medium and initial concentration, agitation speed batch mode experiments were conducted.

Optimized conditions derived through batch mode experiments are summarized in Table 1.

To study the diffusion process, batch mode experiments are carried out with the adsorbent CMAC at 27 °C and at pH 3 for Cr VI) and at pH 6 for Pb II), Cd II) and Ni II) by varying the initial concentration of the metal solutions used in this study.

The batch-mode experiments were conducted in 100-mL serum vials with 50 mL of wastewater and 10 mL pretreated sediment samples as a starting inoculum.

Batch mode biosorption experiments were performed in 250 mL glass-stoppered, Erlenmeyer flasks with 100 mL of dye solution of known initial concentration (50 mg L−1).

Bath-mode adsorption experiments were carried out at a temperature of 25 °C using a set of 50-mL glass beakers by adding a fixed amount of nanoparticles to the heavy oil model solutions at a nanoparticle-to-solution ratio of 100 mg to 10 mL and different initial concentrations ((C_{i})) of n-C7 asphaltenes and mixing for 24 h, as described elsewhere (Franco et al. 2013b, 2014, 2015).