Sentence examples for mode and temperature from inspiring English sources

This paper deals with the effects of loading mode and temperature on the fracture resistance of asphalt concretes under static loading.

Because of the drawbacks resulting from using a constant temperature, calorimetry has been developed with scanning mode and temperature programming with a constant heating rate.

The proposed procedure was compared with conventional methods based on the use of a single extraction mode and temperature (80 min of headspace extraction at 60 °C or 80 min of direct immersion extraction at 50 °C).

Once temperature was stabilized (68 minutes into the protocol for swine #2, shown in Figure  3, and 63 minutes into the protocol for swine #3, shown in Figure  4), the external heat exchanger was set to cooling mode, and temperature was monitored until goal temperature of 4°C below baseline was attained, at which point the external heat exchanger was set to a warming mode.

The material has been characterised by surface enhanced IR spectroscopy in the reflectance-absorbance mode, and temperature-programmed desorption with mass-spectrometry control.

A standard mode and temperature-modulated differential scanning calorimetry (DSC and TMDSC) and 13C nuclear magnetic resonance (13C NMR) were used to investigate the transesterification and compatibility of PHBDET with PC ABS.

The dual mode sweep occurred every 30 seconds, upon which dynamic mode measurements, static mode deflection and temperature were recorded.

The dual mode sweep occurred every 30 seconds, upon which dynamic mode measurements and temperature were recorded.

The linear edge of the cladding-mode envelope and temperature characteristic between cladding modes and core mode of tilted fiber Bragg grating (TFBG) were experimentally investigated.

The sweep occurred every 15 seconds, upon which dynamic mode measurement and temperature were recorded.

The injector was operated in the splitless mode and its temperature was set at 270 °C.