Sentence examples for mobile phase conditions from inspiring English sources

Therefore, gradient mobile phase conditions were optimized in the following experiment.

The electrospun Nafion-PAN plates showed high chemical stability under various mobile phase conditions.

The chromatographic evaluations were carried out using polar organic mobile phase conditions.

Methanol (5%) and formic acid (0.5%) were also added to each vial to match initial mobile phase conditions.

The same samples were then run in the positive ionization (PI) mode with same source and mobile phase conditions.

Unlike DBF, HOBB, even under acidic mobile phase conditions, has obvious tailed-peaks at low concentrations (such as below 0.1 mM), which will affect the integrated results.

In reversed-phase high performance liquid chromatography (RP-HPLC), the mobile phase condition for separating eight isoflavones (daidzin, glycitin, genistin, 6′-o-acetyl daidzin, 6-o-malonyl genistin, daidzein, glycitein and genistein) was optimized using the HCI (High-Purity Separation Laboratory, Department of Chemical Engineering, Inha University) program software.

The initial mobile phase condition consisted of acetonitrile and water (both fortified with 0.4% of formic acid) at a ratio of 5 95, respectively.

The mixture was centrifuged for 10 min at 825 g and filtered (0.45  μm) and analysed by RP-HPLC with the following mobile phase condition: methanol/acetonitrile/methane/acetic acid (50/44/3/3; v/v/v/v) at 1 mL/min flowrate, by using a C18 reversed phase column (Thermo C18, 4.6 × 250 mm, 5  μm).

The various chromatographic methods used for fullerene separation have been investigated in several investigations, including stationary and mobile phases, conditions of detection, separation yields in some case, and a general discussion for each method.

Mobile-phase conditions were identical for all target compounds in the analysis (see Supplemental Material, Table S1).