Sentence examples for mm were developed from inspiring English sources
Tubular constructs of diameter <6 mm were developed.
Cold work tool steel coatings with a thickness up to 2 mm were developed on bond coated low carbon steel substrates for wear resistance evaluation.
Novel Cr-based Cr30Fe26Co7Mo14C15B6Y2 and Cr45Fe11Co7Mo14C15B6Y2 BMGs with a critical diameter up to 8 mm were developed by copper mold casting.
In this study, HPFRC mixtures with a maximum aggregate size of 12 mm were developed with maximal variation in coarse aggregate contents without compromising deflection-hardening behavior.
Fabrics with three different pore sizes 0.5 mm, 1.0 mm, and 1.5 mm were developed with a natural cotton yarn of 36 Tex and the resulting fabrics were used for composite development.
To substitute bearing steel mill balls used in magnetic material powder production, a novel mini-sized high Cr mill balls with sizes in the range Ø 6.35 7.14 mm were developed.
The SiPM-based PET insert which has peak sensitivity of 3.4% and center volumetric resolution of 0.57 cubic mm was developed.
The flat evaporator with an outside diameter of 41 mm and a thickness of 15 mm was developed with a copper powder wick.
For that reason a novel pressure transducer array with a minimum distance between two adjacent measurement points of only 2 mm was developed.
A two-dimensional scintillator-based neutron detector that has a neutron-sensitive area of 256×256 mm2 with a pixel size of 4 mm was developed.
A large-scale dynamic grouting model testing system (4000 mm × 2000 mm × 5 mm) was developed, and the diffusions of cement and fast curing grouts in dynamic water grouting were investigated.
