Sentence examples for mm were attached from inspiring English sources

Reflective markers (1 mm) were attached to bilateral hindlimb landmark joints, i.e. iliac crest, greater trochanter (hip joint), lateral condyle (knee joint), lateral malleolus (ankle) and distal end of the fifth metatarsophalangeal (MTP) joint.

However, with platens to which semi-circular rods of radius 3.0 mm were attached and vertically aligned, a test procedure was provided with which a wide range of tablets tested failed in tension, i.e., split into two halves.

The bases of isosceles triangular wedges having an average of base to height ratio of 0.54 mm were attached to the fin at spacing of 400mm, 500mm and 600mm.

Reflected markers (25 mm) were attached on the joints of the subject to see the clear movements of the skills.

To measure the transverse strain of the specimens, two concrete strain gauges with a length of 60 mm were attached horizontally at the mid height of the cylinder using a quick-curing adhesive, as illustrated in Fig. 5.

Two connecting carbon fiber rods (diameter 8 mm) were attached using pin-to-rod couplings according to the manufacturer's instructions.

A stainless steel cover with a thickness of 0.2 mm was attached as a hard and smooth material.

The glass lens (R 1 = 207.6 mm) was attached to a clear acrylic plate that was fixed to the motorized stage (KZL06075-C1-GA, SEIKIA SEIKI).

Considering the mass of the actual grasped bumper, four suction pads with diameters of 60 mm are attached to the gripper.

To avoid air bubbles, the spinning solutions were carefully loaded into a 5-ml syringe, to which a stainless-steel capillary metal-hub needle with an inside diameter of 0.5 mm was attached.

The Medoc thermode (30 × 30 mm) was attached to the thenar eminence of the right hand.