Your English writing platform
Discover LudwigSuggestions(1)
Exact(6)
The elution measurements performed in this study are performed at a concurrent airflow of 0.3 m s−1, water irrigation rates of 1 21 cm h−1 in materials with particle diameters ranging from 2 to 14 mm to represent media and operation conditions relevant for low flow biotrickling filter design.
The shear span was kept unchanged at 300 mm to represent a ratio of shear span to the effective depth of a beam more than 1.0 and the loading rate was fixed at 1 mm/min (Fig. 1 and 3).
The bottom layer was semi-infinite with a thickness of 50 mm to represent the stroma.
The thickness of the top layer, if used, was 0.3 mm to represent the epithelium.
The radius of the arc was expanded by 5.0 mm to represent the thickness of subchondral bone.
In the present study, we used a diameter of 6.35 mm to represent the diameters of both the carotid and femoral arteries.
Similar(54)
The subscript 2 denotes the partial pressure of oxygen being referred to, in this case 2 mm Hg to represent hypoxia. 2 A minimum number of hepatocytes are required to achieve the desired device functionality.
The traditional RSA method relies on the implantation of small spherical tantalum markers (0.8 and 1.0 mm diameter) to represent each skeletal body of interest (Karrholm et al. 1997).
The remaining IHC results were from the TMA setting with two copies of 2-mm core to represent above at least 98% of the whole lesion (theoretical area is 8π), since usual one 1-mm core (theoretical area is π) represents 91% of the whole lesion and three cores (theoretical area is 3π) do 98% [ 27].
Results suggest that the frequencies of minimum REV sizes of connectivity are close to Gaussian distribution in 0.0 12.0 mm and the REV size of approximately 10.0 mm is available to represent connectivity of translucent silica.
The cube with an edge length of 50 mm was set to represent 100%% (Table 1).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com