Sentence examples for mm tests from inspiring English sources

To address these issues, we used three behavioral paradigms, the open field (OPF), passive avoidance (PA), and Morris (water) maze (MM) tests, which are often used in this field and which we used in our previous studies on the effects of Hg vapor (Yoshida et al. 2004, 2006).

The deviation from isotropy was larger for PP than that for PMMA, especially for the 10 mm test bars.

The deflection analyzed under different conditions is about 1.9 mm, which is consistent with the deflection 1.7 mm tested in the laboratory.

Although residual stresses were not measured in this work, the small test samples (160 × 15 × 4 mm) tested transversely implies that they must be very small.

In this paper, the authors present the results of tests on 15 slabs (3000 × 3000 × 250 mm) tested to failure under different loading conditions.

Micro-centrifuge tubes 1.5 mL, Kimble Amber auto-sampler vials, glass inserts, caps and 12 × 75 mm test tubes were all bought from Fisher Scientific Loughborough, UK.

Overall, considering both gonad quantity and quality factors, sea urchins of 40.0 49.9 mm test size were deemed to be the most promising for gonad enhancement operations.

Data analyses further show that only a small fraction of sand surface area contributed in QD deposition even at the highest IS (100 mM) tested.

A 4 mm×4 mm test chip in 1.6 μm CMOS technology was used for laboratory experiments using MOSFETs for emulation of ISFET/REFET sensors.

With the 10 mm test bars, satisfactory results were obtained from about 1 to 40 kHz for PMMA and from about 1 to 15 kHz for PP.

Impact penetration test was performed according to the AATCC 42, wherein 500 ml of distilled water was poured on standard blotter paper of 152 × 230 mm inserted beneath the 178 × 330 mm test specimen on an inclined surface.