Your English writing platform
Discover LudwigSuggestions(5)
Exact(42)
The deviation from isotropy was larger for PP than that for PMMA, especially for the 10 mm test bars.
A 4 mm×4 mm test chip in 1.6 μm CMOS technology was used for laboratory experiments using MOSFETs for emulation of ISFET/REFET sensors.
Overall, considering both gonad quantity and quality factors, sea urchins of 40.0 49.9 mm test size were deemed to be the most promising for gonad enhancement operations.
With the 10 mm test bars, satisfactory results were obtained from about 1 to 40 kHz for PMMA and from about 1 to 15 kHz for PP.
Micro-centrifuge tubes 1.5 mL, Kimble Amber auto-sampler vials, glass inserts, caps and 12 × 75 mm test tubes were all bought from Fisher Scientific Loughborough, UK.
J. Heat Mass Transfer, 10, 1967, pp. 1767 1778] model showed the most similarities with the data acquired for the 1 mm and 0.8 mm test sections, while the Friedel [L.
Similar(18)
The deflection analyzed under different conditions is about 1.9 mm, which is consistent with the deflection 1.7 mm tested in the laboratory.
Although residual stresses were not measured in this work, the small test samples (160 × 15 × 4 mm) tested transversely implies that they must be very small.
In this paper, the authors present the results of tests on 15 slabs (3000 × 3000 × 250 mm) tested to failure under different loading conditions.
Data analyses further show that only a small fraction of sand surface area contributed in QD deposition even at the highest IS (100 mM) tested.
When combining detergents, the concentration of CHAPS and guanidine hydrochloride was always set to 5 mM, with increase in molarities of the detergents Triton X-100 and Sarkosyl ranging from 5-40 mM tested.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com