Sentence examples for mm ratio from inspiring English sources

The eccentricity of the damaged region increases and the MM ratio decreases with the increase in impingement.

Higher concentration of thiuram disulfide in presence of MBTS (6 3 mM ratio) shows better results with respect to cure and physical properties.

Among all the combinations of TD-MBTS accelerated vulcanizates in Table 3, TMTD-MBTS (mix 12) at 4.5 4.5 mM ratio shows the highest value of rheometric torque.

The geometrical features such as area, perimeter, eccentricity and Major axis to Minor axis (MM) ratio are calculated from the delineated regions.

The effects of process parameters such as extraction time (3 12 h), kernel size range (0.5 3 mm), ratio of kernel to solvent (0.03 0.09 g/ml), and variety of solvents (polar and non-polar) on Soxhlet extraction process were studied.

According to the stratigraphic characteristics of Bohai Bay, set the particle size sample and shale content sample, median particle size UC = 5 − 10, d50 = 150 mm, ratio of mixed sand is 6%, the sand of test formation is industry standard mesh quartz sand.

From the above discussion it is found that TD MBTS at 6 3 mM ratios shows better results in respect of torque and the mechanical properties.

As for the tensile strength, the highest level for PPTD-MBTS accelerated system is obtained at the 6 3 mM ratios and for TMTD-MBTS accelerated system maximum value is raised at equimolar concentration of the accelerators (Table 3, mix 8, 12).

After determining the measured pixel size of the image, and by manual input of the actual size in mm, the pixel-to-mm ratio can be determined and employed for all subsequent image calculations.

Similar to lysine system, when arginine concentration was reduced to 1 mM (1∶1 ratio, Figure 3c) or 0.2 mM (1∶0.2 ratio, Figure 3d), assembled networks of ca. 400 nm silica particles, were formed.

The target height and diameter of samples were tried to be 100 and 50 mm, respectively (ratio of 2).