Your English writing platform
Discover LudwigExact(18)
Electrons for ECD were produced by an indirectly heated barium−tungsten cylindrical dispenser cathode (5.1 mm diameter, 154 mm from the cell, 1 mm off axis) (Heat-Wave Laboratories, Watsonville, California).
Use scissors to snip 1/4" (6 mm) off one corner of the icing filled bag.
In this work, a modified Apparatus 2 in which the impeller was placed 8 mm off center in the vessel was designed and tested.
The presented prototype exhibit a 1.5 mm focus width and a collimated beam up to 15 mm off the output hole.
In this study, we used an ultra-high resolution mode of a commercial CT system having an resolution of 0.2 mm in plane and 0.4 mm off plane [29 31].
However, the cone trap has the advantages that ions entering up to 2 mm off the central axis of the trap are still trapped, the trapping time is less sensitive to the background pressure, and only a narrow range of energies are trapped so it can be used for energy selection.
Similar(42)
The first load was 300 N applied axially in the position of the centric fossa of each crown Fig. 5 while the second load was 300 N applied 3 mm off-axial distally Fig. 6.
The phantom was placed on a moveable platform adjustable to sub-millimetre precision and scanned in ten positions: five axial positions in the centre and five positions 8 mm off-centre from the FOV trans-axially.
In reference to the real situation, the centerline of the upright part of the duct pipe was 200 mm off-center to that of the canopy hood.
The angle γ 50, off is then tan−1(Mm ′ off /c) (column 7 in Table 1), and therefore Pt50, off (column 8 in Table 1) is calculated by F · tan(γ 50, off ).
The 50% dose position of off-axis 50% rounded leaf end MLC could be derived from the ratio of Mm ′ off (column 6 in Table 1) and MO off (column 5 in Table 1) to that of Mm′ (column 3 in Table 1) and MO (column 4 in Table 1).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com