Sentence examples for mm of wire from inspiring English sources

The K-wire was cut with approximately 1 mm of wire protruding in the joint cavity.

EMG activity of the left multifidus muscles was measured using twisted pairs of insulated 0.05 mm wire (Stablohm 800A, California Fine Wire, Grover Beach, CA) with 1 2 mm of wire exposed at each recording tip.

Table 2 Specifications of the transmitter coil and the receiver coil   Parameters Values Transmitter coil Coil L 1 Number of turns 1 Number of strands 4 Diameter of coil 64 mm Diameter of wire 3 mm Coil L 2 Number of turns 2 Diameter of coil 64 mm Diameter of wire 3 mm Number of strands 4 Receiver coil Number of turns 5 Diameter of coil 10 mm Diameter of wire 1 mm.

a A removable appliance with an incorporated uprighting spring (0.8 mm of SS wire) that provoked the distal uprighting of the #37.

Furthermore, the apparatus was set using a customized jig (Figure 1), such that the bracket traversed 1 mm of test wire at the rate of 0.5 mm/min moving upwards and then downwards for 2 min with each cycle lasting for 4 min with a static load cell ±1 kN (100 kgf, 225 lbf) having 0.025% accuracy (series number S11900, Instron Corporation).

Static and kinetic friction forces were measured using a custom-designed apparatus, with a 3-mm stretch of wire alloy at a crosshead speed of 1 mm/min.

c d Bent and straight wire placed in-between the supporting pins, where the 0.43-mm side of wires are resting upon.

The results indicate that the better quality joint may be obtained by selecting the wire type of 5356, the laser focus of −1 mm, the wire type of ER 4043 and the laser focus of 0 mm.

When arc length was 5 mm and vertical distance of wire tip to tungsten electrode was larger than 3 mm, the horizontal distance between melting wire tip and axis of tungsten electrode was 3.5 mm.

A space-saving new wire reduction mechanism achieved a high reduction ratio of 8.46 on Axis 2, taking into account an input pulley diameter of 5.5 mm, output pulley diameter of 54.5 mm, and wire diameter of 1.05 mm.

Constant load tests were performed on specimens made from prestressing steel with a diameter of 3.2 mm: the central wire of a seven-wire strand was used.