Sentence examples for mm of test from inspiring English sources

Furthermore, the apparatus was set using a customized jig (Figure 1), such that the bracket traversed 1 mm of test wire at the rate of 0.5 mm/min moving upwards and then downwards for 2 min with each cycle lasting for 4 min with a static load cell ±1 kN (100 kgf, 225 lbf) having 0.025% accuracy (series number S11900, Instron Corporation).

Boosting reaction was defined as having a reaction of ≥ 10 mm on test 2, with an increase in induration of at least 6 mm related to test 1 [ 7, 8].

To minimize solvent effect and reduce experimental error, we added 0.5 μl of 5 mM solutions of test ligands using a 2 μl pipette.

The low-speed wind tunnel used in the experiments had circular test section with 800-mm length and 500-mm diameter of test section.

Details and dimensions (in mm) of the test beams are shown in Fig. 1.

Compared to the NS group, mechanical loading did not significantly alter the parameters of bone microarchitecture within 0.5 mm of the test implant).

At every one of a range of settings, more than 92% of the contacted leaf and flower head was removed from the top 900 mm of the tested stems.

Briefly, the mixture containing FeCl3 (10 mM), ascorbic acid (1 mM), H2O2 (10 mM), deoxyribose (28 mM) and different concentrations of test samples (40 400 μg/mL) in 500 μL phosphate buffered saline (PBS, 20 mM, pH 7.4) was incubated for 30 min at 37°C.

Both the B. xylophilus solution (50% of the total volume) and drug stock solution of (1% of total volume) were aliquoted into 96-well microplates (e.g., 100 µl B. xylophilus and 2 µl 200 mM stock solution of test compounds in a total volume of 200((l).

Briefly, in this method, 100  μL of sodium phosphate buffer (100 mM, pH 7.5) containing 10 mM DTNB, 10  μL of test solutions (PBE 25, 50, 100, and 200  μg/mL or catechin 1, 5, and 10  μg/mL concentrations) and 10  μL of whole brain homogenate were added in a 96-well microplate and incubated for 5 min at 25°C.

For a heat exchanger with a louver angle of 27°, fin pitch of 2.1 mm and flow depth of 27.9 mm, a series of tests are conducted for the air-side Reynolds numbers of 80 400, with variation of inlet humidity condition.