Sentence examples for mm of high from inspiring English sources

This paper reports on a series of tests which were carried out on full-scale sections of rail that had been treated by laser cladding aiming to create a layer (~1 2 mm) of high performance material on the rail head.

A longitudinal bulkhead of 76 mm of high-tensile steel was added to improve underwater protection.

A longitudinal bulkhead of 76 mm of high-tensile steel was added to improve the underwater protection.

Their deck armor was increased to a maximum thickness of 114 mm, and a longitudinal bulkhead of 76 mm of high-tensile steel was added to improve the underwater protection.

Tumor budding was assessed using the 10 high-power fields (10HPF) method (40×; HPF field area 0.049 mm) of highest density along the invasive front [ 25, 26].

Two walls were overlaid with 15 and 25 mm thick of high strength mortar on one face without any textile sheet.

It contains alternating layers (~ 1 mm thick) of high and low porosity that are related to differences in cementation and compaction (Fig. 8h), rather than a major difference in grain size (Fig. 6h).

It contains alternating layers (~ 1 mm thick) of high and low porosity (Fig. 6f), characterised by medium-coarse (~ 500 μm) and fine (~ 200 μm) grain sizes, respectively (Figs. 6f, 8f).

Single pellets (≈3 mm diameter) of high density polyethylene (HDPE) have been burned in an electrically heated bed of silica sand, fluidised by air or mixtures of N2 and O2 at atmospheric pressure.

To directly estimate the amount of calcium influx, we sequentially patched PNs first with Fura-FF to measure Δ[Ca2+]i signals and later with 10 mM of the high-affinity calcium indicator Bis-Fura-2 (BF2).

The same procedure was done incubating the plasmidial DNA with 5, 10, 15 and 20 μg of the TcPR-4b protein in the presence of 1 mM of CaCl2 (higher concentrations led to protein precipitation).