Exact(11)
Smaller image formats down to 18 × 24 mm (half frame) may be used.
The first Ilizarov ring is fixed in place perpendicularly to the tibial shaft just below the tibial tubercle using two wires and two 6 mm half pins.
The first inflated balloon was cut in the median, and the distal free half-balloon (about 10 mm, half spindle type, withered shape, with the tip of a metal marker) was set along the guidewire.
A second scan at Y = 1.8 mm (half of the SiPM pitch from the center) was also performed to check that the DOI performances were independent of the scintillation position.
For thin deposits, between 0.3 and 1 mm, the ashmeter has a theoretical absolute resolution of 0.025 mm (half graduation), while for thicker deposits, between 7 and 20 mm, this value is 0.25 mm.
The concern about a stress riser between the nail and the plate has not been an issue in this young adult population Open image in new window Fig. 6 This intraoperative photograph shows the concept of using pins to mark the femoral rotation and, specifically, using a 6 mm half pin in the lesser trochanter to control the proximal fragment during nail preparation and insertion.
Similar(49)
Two 4 mm half-pins were used in the fibula, one epiphyseal and one metaphyseal.
For thin fuels, a full gap of 10 mm (5 mm half-gap) provided a compromise between buoyancy suppression and heat loss.
In this paper, four types of stent configuration namely half-Y (6 mm), half-Y (4 mm), cross-bar, and full-Y configuration will implanted on real 3D artery bifurcation aneurysm effected arteries.
Whatman 44 filter paper was used for NCA gap heights ranging from 6 20 mm (half-gap below and above sample) and average opposed flow velocities 1 40 cm/s.
Stimulated insulin release is measured by exposing islets to a higher glucose concentration such as 11.1 mM (half-maximal) or >28 mM (maximal).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com