Sentence examples for mm design from inspiring English sources

Connector designs were as follows: Design I: OE and GE 0.90 mm; Design II: OE 0.90 mm and GE 0.25 mm; Design III: OE 0.25 mm and GE 0.90 mm; and Design IV (control): OE and GE 0.25 mm.

Cement:sand:gravel = 1 2 2, water-cement ratio: 0.4 0.5, jet thickness: initial spray 30 50 mm, re-spray 150 170 mm, design strength: no less than C25. Figure 3 shows the support parameters.

FRCM properties Area of fabric per unit width A f_SD = 0.011 mm Area of fabric per unit width A f_PD = 0.046 mm Design tensile strain (mean minus one standard deviation) ε fd = 0.0163 mm/mm Tensile modulus of elasticity E f = 128 GPa Design tensile strain of FRCM shear reinforcement ε fv = min (ε fd, 0.044) mm/mm Number of plies N = 4.

The 100 mm design was not completed by the time work was scheduled to begin, so the 138.6 mm gun was chosen.

The MM THA group included only patients implanted with the first-generation MM design.

The median intensity difference for each MM design is given in Figure (5a, b).

MZ and MM designed the research study.

MM designed the study and edited the manuscript.

MM designed the study, collected the data, developed the formulas, performed the analyses and wrote the first draft of the manuscript.

The reactor has a hydrogen production capacity of 6 m3/h (STP) and a main body diameter of 97 mm, designed to withstand temperatures up to 1023°C and pressures up to 1.5 MPa.

Two types of pads are employed with diameters of 73 mm and 60 mm, designed for forces of 1.5 MN and 1.0 MN, respectively.