Sentence examples for mm density from inspiring English sources
The synthetic rubber foam cushion materials D (thickness of 54 mm, density of 68·70 kg m−3) and 1·9D (thickness of 101 mm, density of 69·72 kg m−3) may be recommended for tractor seats on the basis of real time properties.
The compressive forces were maximum (1202 1367 N) with coir based composite seat backrest cushion materials (thickness of 80 mm, density of 47.19 kg/m3) and were minimum (943 1108 N) with high density polyurethane foam (thickness of 44 mm, density of 19.09 kg/m3) for the seats.
Based on the hydrodynamic characteristics at the layer inversion point in three-phase fluidized beds with binary solids, rod-to-bed heat transfer was investigated in a semi-cylindrical transparent column (0.21 m inner diameter and 1.8 m height) with polymer beads (diameter 3.3 mm, density 1280 kg/m3) and glass beads (diameter 0.385 mm, density 2500 kg/m3) as binary solids.
The average percentage reduction in Ceq was the highest for thinner high density polyurethane (PU) foam (thickness of 44 mm, density of 19.09 kg/m3) at different frequencies of vibration.
The application of Li2TiO3 pebbles (diameter: 0.2 2 mm, density: 80 85%T.D., grain size: <5 μm) was proposed in the Japanese and European blanket design of a fusion reactor.
The optimized properties of the carbon paper are as follows: thickness 0.23 mm, density 0.53 g cm−3, resistivity 2.6 mΩ cm−1, tensile strength 19.4 MPa, porosity 66%, gas permeability 2 080 mm cm−2 h−1 mmAq−1.
Some powdery mildew inoculations were performed at high (~100 conidia per mm) and low (~1 conidium per mm) densities.
Measured response variables included granule size (geometric mean diameter), granule yield (1.68 3.35 mm), bulk density, true density, and porosity.
Methidation initial concentration = 1.4 mM, current density = 60 mA cm−2, electrolyte = 2 % NaCl).
Fe foam (FF) (thickness: 1.5 mm, bulk density: 0.45 g cm-3, number of pores per inch: 90) was purchased from Kunshan Electronic Co., Ltd.
Ni foam (NF) (thickness: 1.5 mm, bulk density: 0.23 g cm-3, number of pores per inch: 110) was purchased from Changsha Lyrun Material Co., Ltd.
