Sentence examples for mm coating from inspiring English sources

The reinforcing mesh was embedded within an external 50 mm coating.

Surface temperature of the piston with 0.4 mm coating thickness was increased up to 82 °C.

With 60 wt% addition amount and 1.5 mm coating thickness, the minimum reflection loss of Zn ferrite/MWCNTs composite was −42.6 dB at 12.1 GHz.

The mock-up with 0.9 mm coating had the highest surface temperature than the other two mock-ups, delaminations of this mock-up were found in the near surface by SEM.

The SSA materials are incorporated as a thin (0.1 mm) coating on the outside surface of the reactor core and as core additions in three possible forms: 2.0 mm diameter pins in the interstices of the core block, 0.25 mm thick sleeves around the fuel stacks and/or additions to the uranium nitride fuel.

The ZnO/Ni/ZnxNiyFe3−x−yO4 hybrid micro-hexahedra obtained at 700 °C and γ = 2 0.5 0.5 showed a minimum reflection loss (RL) of −36.52 dB at 10.0 GHz with absorbing frequency (RL ≤ −20 dB) from 4.59 GHz to 18.0 GHz, corresponding to 1.7 mm–5.5 mm coating thickness.

The test firing was conducted on the glass panes of 3 mm, 4 mm privacy panes and 5 mm coated with a thin SCF.

The novel BAμE devices were lab-made prepared having smaller dimensions by using flexible nylon-based supports (7.5 × 1.0 mm) coated with convenient sorbents (≈ 0.5 mg).

The uniaxial compressive strength (UCS), modulus of elasticity (E), and energy absorbance capacity of uncoated and 5 mm coated cores having 25, 55, 75, and 100 mm diameters were compared.

For a glass in thickness of 3 mm coated with a PC layer in thickness of 12 μm, the G value at tinted state was reduced to 0.78 as compared with a G value of 0.87 for an uncoated glass.

For the growth of In2O3 NWs, 0.2 g of fine In powder (Aldrich, Cyprus, Mesh 100, 99.99%) was weighed and loaded in a quartz boat, while square pieces of n + Si 001) ≈ 7 mm × 7 mm, coated with ≈1.0 nm of Au, were loaded at various distances from the In.