Exact(2)
Also, the type of masonry unit was 150 mm concrete, 150 mm clay, and 100 mm clay.
The optimal combination was as follows: side wall with 80 mm alumino-silicate fiber felts, 232 mm diatomite brick and 116 mm chamotte brick; top wall with 50 mm clay castables, 110 mm alumino-silicate fiber felts and 200 mm refractory concrete; and bottom wall with 232 mm high-alumina brick, 60 mm clay castables and 68 mm diatomite brick.
Similar(58)
Case studies show that, in arid and semi-arid desert sand-covered terrains, sampling of fine-fraction (− 120 mesh, < 0.125 mm) clay-rich horizon soil is cost-effective for regional geochemical surveys for sandstone-type uranium, gold, and base metal deposits.
To establish the microbial community on the carrier material, 40 sterilized carrier particles (2 4 mm sized clay particles, total N: 3 8 mg L−1, P2O5: 5–10 mg L−1; K2O: 100–120 mg L−1, expanded for high pore volume (>80 %), fired, Seramis GmbH, Mogendorf, Germany) were added to the liquid culture.
c 3654 seconds later Fig. 6 Cross section view, x = around 193 mm (Upper Kaolin clay, Lower Toyoura sand).
The equations are applied to evaluate the effectiveness and equivalency of composite liners having either a 0.6 m-thick compacted soil liner or a 6.5 mm-thick geosynthetic clay liner (GCL) overlying an intermediate attenuation layer and an aquifer having horizontal flow.
A 0.15-m-deep hole was dug in the ground and filled with 2- to 6-mm-diameter ceramic clay pellets (AB Svenska, Leca, Sweden) before pots were added.
Soil texture (40 ) was divided into seven groups in order of increasing particle size, ranging from clay (<2 mm) through silt (2 to 50 mm) to sand (0.05 to 2.0 mm).
Three size fractions, clay (< 0.002 mm), silt (0.002 0.05 mm) and very fine sand (0.05 0.1 mm) of suspended sediment accounted for 89%96.3%% of the sediment.
The second is clay (<0.005 mm) taking up 20−40 %, and the minor component is fine sand (>0.05 mm) less than 10%%.
Two size ranges, 1.5 3.5 and 2.5 4.5 mm, of a foamed clay called StarLight C were used in pilot-scale reactors.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com